Delphi Warranty Information

The following is a summary of manufacturer warranty terms. This summary in no way modifies or supersedes the original terms.

Delphi Corporation (“Delphi”) warrants all Electric Fuel Pump products sold by Delphi Product & Service Solutions to be free of defects in material and workmanship for a period of one year from the date of installation or 12,000 miles or 20,000 kilometers, whichever occurs first, subject to the following terms.

Delphi will not be responsible for damage resulting from any (i) deviation from Delphi’s application recommendations as printed in or on Delphi’s catalog or any packaging, labels or instructions with a Product, (ii) installation of a Product in a manner which is inconsistent with Delphi’s written instructions or accepted industry standard, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, (viii) normal wear and tear, improper application, installation or operation of the Product.

This warranty does not apply to any Product that is installed in vehicles used for towing exceeding the vehicle manufacturer’s defined limits, racing, public service, security or government use, off-highway recreational use, or four-wheel drive off-highway competition.

Products covered include Electric Fuel Pump assemblies and any other components that are packaged with products as supplied by Delphi. These other components include, but are not limited to, gaskets, filters and other hardware necessary for the installation as packaged by Delphi.

Note: An appropriate new strainer must be installed to prevent voiding of warranty.

Note: Fuel pumps and or filters and injectors are considered to be hazardous materials once exposed to the fuel. Transportation of such items is under the jurisdiction of the Federal Department of Transportation (DOT) Regulations 49 CFR 173.4 for shipping a limited quantity of dangerous goods (residual gasoline). See more info on the regulations here.

Delphi Powertrain Systems, LLC (“Delphi”) warrants to the original purchaser all air conditioning compressor products (each a “Product” or collectively “Products”) sold by Delphi to be free of defects in material and workmanship for a period of one year, unlimited mileage, from the date of installation.

Delphi will not be responsible for damage resulting from any:

• Deviation from Delphi’s application recommendations as stated in Delphi’s online catalog system or on any packaging, labels or instructions with a Product
• Installation of a Product in a manner which is inconsistent with Delphi’s written instructions or accepted industry standard
• Alteration or modification of a Product
• Misuse, neglect, abuse or accident
• Normal wear and tear, improper application, installation or operation of the Product

This warranty does not apply to any Product that is installed in vehicles used for:

• Towing exceeding the vehicle manufacturer’s defined limits
• Racing, off-highway recreational use or four-wheel drive off-highway competition
• Public service, security or government use

Any repaired or replaced Product shall also remain subject to the original warranty period from the date of the original installation, and any repair or replacement shall not extend the original warranty period in any manner or start a new warranty period.

This limited warranty shall become void in the event that the vehicle, in which the Product is installed, incurs physical damage such as, but not limited to, fire, flood or a collision resulting in any damage to the vehicle engine compartment or any surrounding body parts.

Parts must be installed on the application specified by Delphi. If a part is used on an application other than one approved or cataloged by Delphi, the Warranty will be void.

The use of any additives (sealants, lubricant enhancers and system treatments) in the A/C system will void the Product warranty.

The use of trace dyes or leak detection dyes is permissible when used in accordance with the dye supplier’s written instructions. Usage of excessive amounts of dye will void the Product warranty.

The accumulator dehydrator (“A/D”) or receiver dryer (“R/D”) must be replaced as part of the Product replacement. Where available, usage of a Delphi A/D or R/D is required or an equivalent OEM A/D or R/D must be used. Failure to replace the A/D or R/D will void the Product warranty.

Open loop flushing with chemical solvents is not recommended by Delphi. This is due to residual flush being left behind, diluting the A/C system lubricant, and causing Product noise and/or failure. If a solvent flush is used, all of the flush must be removed in order to maintain the warranty. If traces of flush residue are detected in the returned component, the warranty will be void.

This warranty only applies to Products purchased in the United States and through Delphi Distributors in Canada.

The Products are warranted for use with only R-12 (CFC-12) or R -134a (HFC-134a) refrigerants. The correct type and amount of refrigerant oil must be added (refer to vehicle service manual or Product manufacturer for specifications).

• Mineral oil 525 must be used for R-12 systems
• PAG (Polyalkylene glycol) lubricant must be used for R-1 34a systems
• RL488 125 viscosity must be used for R4, H6, V5 and V7 Products
• RL897 60 viscosity must be used for CVC Products
• Mineral oil is to be used as a lubricant for the O-rings of both R-12 and R-134a systems.

The orifice tube must be replaced if the vehicle is so equipped. The expansion valve must be replaced or the inlet screen must be cleaned if the vehicle is so equipped.

Closed loop flushing with liquid refrigerant is the recommended means to remove oil and debris from the air conditioning system. R-12 refrigerant must be used as the flushing agent for R-12 systems and R-134a refrigerant must be used as the flushing agent f or R-134a systems.

A/C systems which have been contaminated with debris from a Product failure, a failed A/D or R/D desiccant bag or system additives cannot be cleaned by flushing only. These contaminates may be captured throughout the refrigerant side of the A/C system. Under these conditions, contaminated or restricted components must be replaced to ensure a clean and properly performing A/C system.

The fins of the condenser and radiator must be checked for proper airflow, obstructions or restrictors.

The engine fan clutch or electric fan must be checked for proper operation.

The Product clutch driver (not just the clutch pulley) must be turned a minimum of four revolutions prior to installation on the vehicle. Delphi turning tool, CB10049, or an equivalent turning tool or spanner wrench, must be used to turn the Product shaft.

The Product clutch electrical circuit must be checked for proper operation (refer to the vehicle service manual or equivalent for specifications and procedures).

Delphi recommends the use of in-line filters and suction screens during Product replacement.

This limited Warranty shall not apply to any failure of a Product caused by improper maintenance of a vehicle’s air conditioning system or failure of any other system component.

Acceptable proof of following these procedures will include shop repair orders or purchase receipts and must accompany each Product being returned for warranty. Claims submitted with Product destroyed in field must have the supporting documentation submitted with the claim number referenced.

Delphi Powertrain Systems, LLC (“Delphi”) warrants to the original purchaser of the Engine Management products listed by product categories below as sold by Delphi (each a “Product” or collectively “Products”) to be free of defects in material and workmanship, for the warranty periods set forth below.

• Control Valves: Twelve (12) months from date of installation, or 12,000 miles (or 20,000 kilometers), whichever occurs first
• Diesel Injectors: Twelve (12) months from date of installation, with unlimited mileage during the 12-month period
• EGR Valves: Ninety (90) days from date of installation, or 3,000 miles (or 5,000 kilometers), whichever occurs first
• Engine Sensors: Twelve (12) months from date of installation, or 12,000 miles (or 20,000 kilometers), whichever occurs first. Engine sensor products include cam/crank, knock, MAF, MAP, oxygen, speed, temperature, and throttle position sensors
• Fuel Injectors: Twelve (12) months from date of installation, or 12,000 miles (or 20,000 kilometers), whichever occurs first
• Ignition Coils: Thirty-six (36) months from date of installation, or 36,000 miles (or 58,000 kilometers), whichever occurs first
• Ignition Wire Sets: Limited lifetime warranty
• Ignition (all other): Twelve (12) months from date of installation, or 12,000 miles (or 20,000 kilometers), whichever occurs first. Ignition products include assemblies (excluding Ignition Coils and Wire Sets) and any other components packaged with these ignition products as supplied by Delphi. These other components include, but are not limited to, gaskets, filters and other hardware necessary for the installation as packaged by Delphi.

These warranties are the only express warranties made by Delphi for the Products. This limited warranty is not transferable and applies only to the original purchaser of the Product.

Delphi will not be responsible for damage resulting from any (i) deviation from Delphi’s application recommendations as stated in or on Delphi’s online catalog system or any packaging, labels or instructions with a Product, (ii) installation of a Product in a manner which is inconsistent with Delphi’s written instructions or accepted industry standard, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, or (viii) normal wear and tear, improper application, installation or operation of the Product.

This warranty does not apply to any Product that is installed in vehicles used for towing exceeding the vehicle manufacturer’s defined limits, racing, public service, security or government use, off-highway recreational use, or four-wheel drive off-highway competition.

A dated purchase receipt or other written proof that the Product is within the warranty period will be required in order to honor your warranty claim.

Note: Fuel pumps and or filters and injectors are considered to be hazardous materials once exposed to the fuel. Transportation of such items is under the jurisdiction of the Federal Department of Transportation (DOT) Regulations 49 CFR 173.4 for shipping a limited quantity of dangerous goods (residual gasoline). See more info on the regulations here.

12 months by time or 24,000 miles (38,624 km by mileage), whichever one comes first.

To initiate a warranty claim, download and fill out the form below, carefully following the instructions. This warranty form claim must be completed and the part sent within 30 days of part failure. Parts not specifically called out above are not eligible for warranty claims. Please contact us with questions.